home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Night Owl 6
/
Night Owl's Shareware - PDSI-006 - Night Owl Corp (1990).iso
/
050a
/
tik40.zip
/
TIKLER.DOC
< prev
next >
Wrap
Text File
|
1991-10-01
|
43KB
|
831 lines
TIKLER
Version 3.95
by Dick Olsen
Table of Contents
A Few Words About Shareware...........................1
Registration Benefits.................................1
TIKLER Support........................................2
Introduction..........................................3
Converting From Older Versions Of TIKLER..............4
Passwords And File Encryption.........................4
Specifying Event Files................................5
Command Line Options..................................5
TIKLER Function Keys..................................6
F1---EXIT.............................................6
F2---ADD EVENT........................................6
DITTO KEYS AND ABORT EVENT KEYS.......................7
F3---VIEW PAST EVENTS.................................7
F4---LIST ALL EVENTS..................................7
F5---SEARCH FOR EVENT.................................7
F6---FLUSH & MORE.....................................8
F7---FIND A DATE......................................9
F8---PRINT EVENTS.....................................9
F9---CHANGE NUMBER OF DAYS NOTICE.....................9
F10--LIST AGAIN......................................10
ALT-E, EDIT MODE.....................................10
INSTALLING TIKLER....................................11
A FEW EXTRA WORDS....................................12
REGISTRATION FORM....................................13
DISCLAIMER OF WARRANTY...............................14
ASSOCIATION OF SHAREWARE PROFESSIONALS...............14
SOFTWARE ORDER FORM..................................15
SITE LICENSE INFORMATION.............................16
SITE LICENSE FORM....................................17
< 1 >
A Few Words About ShareWare....
Tikler is made available to the general public under the concept
of ShareWare. As such, you are free to copy it and distribute it to
others provided that all accompanying files are distributed intact and
unmodified, and that no fee is charged. The author retains ALL rights
to the program. You are encouraged to try the program for a reasonable
period of time to see if you like it. If it proves to be enjoyable,
please consider supporting the efforts of the author by registering
your copy of the program.
In any correspondence regarding Tikler, please be SURE to specify
the following information:
* What version of Tikler you have
* What brand and model computer you have
* How much memory your machine has
* The disks your machine has (hard, 2 floppies etc.)
* What kind of video card your machine has
* Any other type of cards your machine has
REGISTRATION BENEFITS:
Registering Tikler has lots of benefits, some tangible, some not.
Registered users are entitled to the newest version of the program.
If the version you are registering is not the newest, the current
version will be sent to you automatically unpon receipt of your
registration. If the version you are registering IS the newest
available, your name will be added to my list of users who will
receive the next new release of the program if one becomes available.
Additionally, registered users can obtain an updated version at any
time for only $5.00 ($7.00 outside North America).
As a registered Tikler user, you will also be eligible to receive
a FREE CompuServe IntroPak. The Intropak includes a $15.00 usage
credit for new CompuServe members. What a deal!
To register your copy of Tikler, send $15.00 along with the
registration form at the end of this document to the author:
Richard Olsen
68 Hartwell Ave.
Littleton, MA. 01460
Thank you for supporting my efforts!
< 2 >
TIKLER SUPPORT:
Tikler, like all of my other programs, is well supported. This
support is available whether or not you are a registered user. If
you have a problem or a question regarding Tikler, you can
obtain assistance in one of the four ways listed below.
1. TELEPHONE. I do not publish my telephone number for lots of
reasons. It is listed, and you can obtain it by calling the
telephone company information service. If you must call, please
be considerate by not calling after 10:00 PM Eastern Standard
Time. If I'm available, I answer all calls personally. If I'm
not there, please leave a message stating (clearly please) what
your name is and the phone number where you can be reached.
It's also helpful if you specify the best time for me to call.
Since the registration fees for my programs are low, expect any
return calls to be COLLECT.
2. MAIL. This is the slowest but most reliable way to obtain support.
In any correspondence, please specify what program you have a
question about, and include the information about your machine
configuration as requested on the previous page. I answer all mail
personally, but tend to reply to registered users first since I
feel they deserve preferential treatment. I suggest using the
Problem Report Form near the end of this document.
3. COMPUSERVE. Leave messages on CompuServe via CMAIL to my PPN,
70031,534. I check in there almost daily and answer messages as
soon as I get them.
4. XEVIOUS BBS. My 'home BBS' is Xevious in Framingham, MA. The
phone number is (508) 875-3618. Leave messages to DICK OLSEN. I
check into Xevious several times a week, so allow a day or two
for a reply to appear.
< 3 >
Introduction
Welcome to TIKLER. TIKLER is an easy to use program that will
help you keep track of upcoming events. It is intended to be
added as the last item in your AutoExec.Bat file so that it will
be run automatically each time you turn on your computer. TIKLER
displays the coming events for any number of days in the future,
or it can display events that have occurred during any number of
days past up until the present. It's kind of a note
taker/reminder/calendar program that you should find useful, if
not indispensable. Unlike many commercial programs that perform
similar functions, TIKLER was designed to be quick, easy to
learn, and free-form in its note entries. Chances are that you
won't need to refer to this document in order to make full use of
TIKLER. I suggest, however, that you read it in its entirety so
that you'll have a fuller understanding of the program. If you
have a color monitor, TIKLER displays today's events in yellow,
tomorrow's events in light green, and all other events in cyan on
your screen. All functions only require a single keystroke to
activate. TIKLER creates and maintains a file on your disk
called COMEVENT. This is the default file that TIKLER will use
each time it is run. Once TIKLER is running, you can change to a
different event file if you wish. The file is created in
ordinary text mode so that it can be edited with almost any word
processor program or editor, however, it is recommended that you
use the built in editor to make any changes. If you must edit an
event file with a word processing program, BE CAREFUL! If you
have too few lines or too many lines, TIKLER will be confused
when it reads the event file.
When you first install and run TIKLER, you will be asked how many
days notice you would like. What you enter here determines the
default number of days that TIKLER will look ahead to find
events. A good number seems to be 14 days, but you can enter
whatever you would like. Once you have specified the number of
days notice you would like, TIKLER will create a file in the
current directory called COMEVENT, which is the default event
file. The first entry in this file is the number of days notice
you have specified. This number can be changed by selecting
number five in the FLUSH EVENT mode. Each time you enter a new
event, it will be added to the COMEVENT file, or to whatever
event file is currently active. TIKLER, beginning with version
3.0, also contains a simple 'what you see is what you get' event
editor. This built in editor makes it easy and fast for you to
change events or their dates.
< 4 >
If you have used older versions of TIKLER......CONVERT!
If you have used a version of TIKLER prior to version 3.0, and
you have an event archive file (TIKARC.EVT) created, you will
need to convert it to the new format required by versions
newer than 3.1. This is a simple process since a program is
provided on your TIKLER disk to do this for you. The program is
called CONVARC.EXE. Copy it from the distribution disk to the
directory on your hard disk where TIKLER is installed. Then type
CONVARC and the program will take care of the conversion for you.
Once the conversion has been made, don't do it again! No other
files should need to be changed.
PASSWORDS and FILE ENCRYPTION
Beginning with version 3.9 of TIKLER, password protection and file
encryption are supported. When you first start TIKLER as previously
described, you will be asked for a PASSWORD. If your situation
requires a reasonable amount of security, you can enter a password
when it's requested. If you do not require password protection,
just press ENTER when asked for the password. Entering a password
will also cause the event file associated with it to be encrypted
so that people who do not know the password cannot read your events.
Once a file has password protection, that password cannot be changed.
Conversely, if no password is assigned when the event file is created,
a password cannot be assigned at a later date. If you choose to use
password protection and file encryption, DO NOT FORGET THE PASSWORD.
If you do, your file will not be accessible and will be unreadable by
any reasonable means. These security measures are NOT infallible. A
skillful and determined person could decipher the password and/or
encryption given enough time. For this reason, TIKLER is not
recommended for situations requiring highly secure information.
Additionally, all event files are protected against erasure, either
accidentally, or intentionally.
< 5 >
SPECIFYING EVENT FILES
Another added feature with the release of TIKLER v3.9 is the ability
to specify what event file you want TIKLER to access when it starts.
This method of starting TIKLER is very useful in network applications
or if for some reason you don't want TIKLER to use it's default
event file (COMEVENT). To use this "command line startup" feature,
simply add the event file name you want TIKLER to use to your
command line when you start the program. For example if you have an
event file called STUFF, and you want TIKLER to use it when it runs,
start TIKLER with the following command line:
TIKLER STUFF <enter>
TIKLER will start, and immediately use the event file called STUFF.
If STUFF does not exist, TIKLER will create it for you. Additionally,
if STUFF has a PASSWORD associated with it, you will be asked to
enter it before STUFF can be used.
COMMAND LINE OPTIONS
TIKLER defaults to displaying the events two days previous to the
current date. If you would prefer, you can have it display only
the events starting with the current day. To do this, type:
TIKLER -0 <enter>
when starting the program. You can also substitute -1 for the -0
to display events starting with the previous one day. You can also
start TIKLER with both command line startup options like this:
TIKLER -0 STUFF <enter>
If you use both command line startup options, you MUST specify
the previous number of days to display (the -0 in the example)
first, and the file name to use second, separated by a space.
< 6 >
TIKLER FUNCTION KEYS
While TIKLER is running, the bottom two lines of your display
will show eleven function keys. The operations performed by these
function keys are as follows:
F1 <EXIT>
This key is pretty self explanatory. When pressed, it will return
to DOS at whatever directory TIKLER is installed in. You can run
TIKLER at any time by changing to the directory where it is and
typing TIKLER. A batch file could be created that would do this
for you.
F2 <add event>
Press this key if you want to add an event to your active event
file. TIKLER will ask you first for the date of the event, then
for the description of the event. You can enter up to 64
characters for the event description, but it's best to keep your
entries as short as possible. The built in editor will truncate
all events so that the date plus the event text all fits on one
80 character line. When entering the date of the event, you can
use several formats. Some examples are shown below:
8/8/87
08/08/87
8/8
8-8-1987
8-08/1987
In the above examples, TIKLER will add missing digits, and
convert the " - " characters to " / " characters so that for
August 8, 1987, TIKLER would convert the date as entered in any
of the above formats to 08/08/1987, if 1987 were the current
year. If the event date is going to occur in the current year,
the year portion of the date can be skipped by just pressing
enter. TIKLER will get the year from DOS and add it for you. If
you just press ENTER in response to the date question, TIKLER
will get the current date from DOS.
< 7 >
DITTO AND ABORT EVENT KEYS
When adding events, there are two more special keys you should be
aware of. One of these is the DITTO key. When you press the "
key, the previously entered date or event string is copied. For
example, suppose you had a meeting every Monday morning. After
you add this event to TIKLER for the first time, simply change
the date then press " when you are asked to enter the event. The
same information used in the previous event will be copied into
the current event, saving you lots of typing. The ditto function
also works on the date. The other special key is the back-slash
(\). If TIKLER finds this character anywhere in either your date
or your event entry, it will abort the saving of that event. When
events are listed on the screen, TIKLER will get the appropriate
day of the week from DOS and print it next to the date. As each
event is entered, it is sorted by date before being added to your
event file. Beginning with version 1.80, the day of the week will
also be added to your event date as it is saved in your active
event file. Compatibility is maintained with existing EVENT
files.
F3 <view past events>
This key allows you to temporarily change the NUMBER OF DAYS
NOTICE to some number of days in the past. For example, suppose
you want to view the events that occurred within the past 3
weeks. When TIKLER asks for the number of days past, you would
enter 21. Now TIKLER will display events that happened during the
three weeks preceding TODAY, as well as TODAY'S events. If you
have more events than TIKLER can fit on the screen, TIKLER will
pause and wait for you to press ENTER and then it will show you
the remaining events.
F4 <list ALL events>
When you press this key, all of the events from your ACTIVE EVENT
FILE will be listed. TIKLER will pause at the end of a full
screen and wait for you to press the 'ENTER' key before showing
you the rest of the events in your file.
F5 <search for event>
Pressing this key will cause the message 'enter KEYWORD:' to be
displayed in a window on your screen. You can enter a single word
or phrase that you want TIKLER to look for. TIKLER will search
your entire ACTIVE EVENT FILE for event descriptions that contain
your keyword or words. Each event containing the keyword or
phrase will be displayed on your screen.
< 8 >
F6 <flush & MORE>
Pressing the F6 function key will present you with six choices.
If you pick choice number 1, you will be asked for a date prior
to which events are to be deleted. You can use any of the date
formats specified under the F2 key description. After entering
the date, TIKLER will ask you if you would like to ARCHIVE the
events that are to be deleted. If you answer "yes" or "y" to this
question, TIKLER will delete all events that occurred before the
date you entered from your ACTIVE EVENT FILE file, but they will
be added to a file called TIKARC.EVT in case you need to refer to
them at a later time. Answering "no" or "n" will cause the events
to be deleted without archiving them. Selecting choice number two
will allow you to selectively delete events one at a time. Each
event will be displayed sequentially until you press "e" to exit
or the end of your ACTIVE EVENT FILE file is reached. As each
event is displayed, you can press "a" to flush the event but add
it to your ARCHIVE, "f" to just flush it from your ACTIVE EVENT
FILE file, or any other key to keep it. You can press "e" at any
time to stop flushing events. If you choose choice number three,
TIKLER will ask you for a date. You can enter the date in any of
the formats described under the F2 key description. TIKLER will
then search your ACTIVE EVENT FILE file for events that have or
will occur on that date, and display them one at a time. As each
event is displayed, you can enter "a" to flush the event but add
it to your ARCHIVE, "f" to just flush the event, "e" to exit the
flush mode, or any other key to continue searching for the date
you entered. Choice number four will give you the opportunity to
delete ALL of the events in your ACTIVE EVENT FILE file. If you
answer "y" when asked "are you sure ?", TIKLER will give you the
choice of adding the flushed events to your ARCHIVE or simply
deleting them ALL. Any other response will get you out of flush
mode. Choice number five really has nothing to do with flushing
events. This choice allows you to change the default NUMBER OF
DAYS NOTICE that is used each time TIKLER is run. Just answer the
question, and TIKLER will do the rest.
Choice number six, CHANGE EVENT FILE, is something new that was
added at version 3.0. Selecting it allows you to change from or
to the default event file, COMEVENT, or to some other event file
that is compatible with TIKLER. If you enter the name of an event
file that does not exist, TIKLER will give you the opportunity to
create it. If TIKLER finds the event file you have specified, all
succeeding activity will be done to that file. If you ARCHIVE any
events from this new file, they will still be added to your
TIKARC.EVT file.
< 9 >
If you have used versions of TIKLER prior to version 3.0, you
will find that the older TIKARC.EVT files are not compatible with
those created by version 3.1. However, the TIKLER disk contains a
conversion program called CONVARC.EXE which will convert your old
TIKARC.EVT file to the new format required. Once the conversion
is made, the TIKARC.EVT file can be edited just like any other
event file using the built in edit mode. It is suggested that
you perform this conversion prior to running the new version 3.1.
The ARCHIVE file created by TIKLER can be viewed by any text
editor or word processing program. If you decide to edit it, or
any other TIKLER event file, BE CAREFUL! Make sure you retain
the same format as the original file. Extra lines can cause
strange looking displays! Instead of using a word processor or
text editor, it is suggested that you change the ACTIVE EVENT
FILE file as described above, then use the built in editor to
preserve compatibility. If you decide to ARCHIVE some of your
events, TIKLER will create the ARCHIVE file for you. The name of
the file created is TIKARC.EVT. All archived events will be added
to this file regardless of what your ACTIVE EVENT FILE is.
F7 <find a date>
When you press this key, you will be asked for the date that you
want to find. TIKLER will search through your ACTIVE EVENT FILE
file and display all events that match the date you've entered.
You can enter the date in any of the formats previously
described.
F8 <print events>
When you press this key, TIKLER will ask you if you want to print
all events, or only those events within the number of days notice
you have specified. The events from the ACTIVE EVENT FILE are
printed in order of date. Don't forget that you can also use the
DOS print screen command. It will print whatever you see on the
screen by pressing SHIFT-PRTSC.
F9 <change number of days notice>
This key will allow you to change how far ahead (or back) you
want TIKLER to look for events. The change is only temporary and
will not be saved to your file. You may want to view all the
events that are scheduled for the next month (meetings, birthdays
etc.). Just press the F9 key and enter 30 for the number of days
notice. TIKLER will immediately look for the events for the next
30 days and display them for you. TIKLER can also show you events
that occurred before the current date by entering a negative
number for the number of days notice. For example, if you were to
enter '-7', TIKLER would find and display the events of the
previous week. You can change the number of days notice as many
times as you wish, but TIKLER will always use the default value
from your ACTIVE EVENT FILE file each time you run it. If you
want to change the default number of days notice, use F6, the
flush mode key.
< 10 >
F10 <list again>
This key will list the events again, based on the current number
of days notice.
ALT-E <EDIT MODE>
The built in editor is a new feature added at the release of
version 3.0. It is something many people have asked for. The
editor is a WYSIWYG (what-you-see-is-what-you-get) type of
editor. This means that once you have an event edited to your
satisfaction on the screen, it will be saved to your ACTIVE EVENT
FILE just as it appears on the screen. TIKLER will recalculate
the day of the week for you if you change the date.
To invoke the editor, just press ALT-E (hold down the ALT key
while you press the E key). TIKLER will then enter the EDIT mode,
and display a screen full of events from the event file you are
currently using. A hilite bar will appear at the first event
listed on your screen. This bar is used to select the event that
you want to edit. Use the UP or DOWN arrow keys to move the bar
up or down one event at a time, or you can use the PGUP or PGDN
keys to move a page at a time through your event file. The HOME
key will move the bar to the beginning of the file, and the END
key will position it at the end of the event file. You can use
the TAB and BACKTAB keys to move the cursor right or left 10
characters at a time, or use the left and right arrow keys to
move the cursor right or left one character position.
Edit mode can be aborted without saving the changes made during
the CURRENT EDIT SESSION by pressing ALT-A.
The bottom three lines of your screen will change to display
what keys perform what while in edit mode. When you exit edit
mode, these lines will be replaced by the general command
function keys. After you have positioned the hilite bar over the
event you want to edit, use the left or right arrow keys to
position the cursor where your change is to be made. Pressing the
DEL key will delete the character at the cursor, while pressing
any other key will cause that character to be inserted at the
cursor position. You cannot delete any characters in the date
field or the day-of-week field because this will mess up the
event file. You can however, change the date, but not the
day-of-week. If the hilite bar is positioned over an event you
want to delete, pressing ALT-D will delete it. ALT-I will
increment the year of the event by one. As mentioned earlier,
TIKLER will compute a new day-of-the-week for you if you change a
date.
When you have finished editing all of the events you want to
change, press ESC to exit the EDIT MODE, and your event file will
be updated to reflect the changes you have made. You can edit as
many events as you like while in edit mode, since all changes are
made to your event file at the end of the edit session.
< 11 >
Installing TIKLER
To install TIKLER on your computer, first change to the directory
in which you want it installed. Then simply copy it from the
floppy disk to the current directory. Once you've copied it, just
type 'TIKLER', and your COMEVENT file will be created, with a
default number of days notice set for whatever number of days you
entered when asked to do so. TIKLER will run, and display the
message 'there are no coming events...'. At this point, you can
begin entering your events with the F2 key. If you have used a
version of TIKLER prior to 3.0, you will need to convert your
ARCHIVE FILE (TIKARC.EVT) to the newer format. Instructions
describing how to do this appear earlier in this document.
To make TIKLER run each time you turn on your computer, just add
the TIKLER command to your autoexec.bat file, similar to the
example shown below:
CD\<directory where TIKLER is installed>
TIKLER
At this time, TIKLER is limited to 600 events. The number of
events you have in your ACTIVE EVENT FILE file is displayed on
the top line of the screen and is updated anytime you add or
delete an event. If you exceed 590 events, TIKLER will remind you
that you are approaching the maximum of 600 events. You should
delete events that are no longer needed. This limit of 600 events
is an arbitrary number that seems to satisfy the needs of most
people. I chose this value in order to save disk space and
optimize speed. Although TIKLER runs quite fast with 600 events,
the fewer you have, the faster it will run.
< 12 >
A few extra words....
TIKLER is distributed under the concept of SHAREWARE. Under this
concept, you are free to use, copy and distribute this program
without charge. You are not permitted to sell it either by itself
or as part of a package. The author retains all of the rights to
the program. The idea of SHAREWARE is a good one. It helps us all
to obtain some really good software at a price we can all afford.
If the SHAREWARE concept is going to continue, we need to support
the efforts of the software authors.
If you find TIKLER to be as handy and helpful as I have, please
register your copy of the program. To register, just fill out the
registration form on the next page, and send it together with
your registration fee of $15.00 (cash, check or money order)
to the address shown. Registered users will receive, free of
charge, the latest version of TIKLER if the one you have is not
recent. If you pass this program on to others, either on floppy
disk or through bulletin boards, please be sure to attach this
document.
Information regarding site licenses for TIKLER can be found at
the end of this document, or in the file SITELIC.DOC on your
TIKLER disk. If you need to use TIKLER on lots of computers, a
site license is an economical way to do it. For further
information or to discuss special requirements, write to the
author:
Richard Olsen
Olsen Outdoors
68 Hartwell Ave.
Littleton, Mass. 01460
< 13 >
Tikler v3.95 REGISTRATION FORM
Dear Dick,
Enclosed please find my check or money order for $15.00. Please
register me as a TIKLER user and send me the latest version if
the version I currently have is not the latest.
Thanks!
YOUR NAME________________________________________________
STREET ADDRESS___________________________________________
CITY, STATE, ZIP_________________________________________
COUNTRY__________________________________________________
TIKLER Version you have__________________________________
WHERE DID YOU GET TIKLER?________________________________
COMMENTS_________________________________________________
_________________________________________________________
_________________________________________________________
Mail To:
Richard Olsen
68 Hartwell Ave.
Littleton, MA 01460
< 14 >
*********************************************************************
* DISCLAIMER OF WARRANTY *
*********************************************************************
This software is sold "as is", without any warranty as to performance
or any other warranties whether expressed or implied. Because of the
many hardware and software environments into which this program may
be used, no warranty of fitness for a particular purpose is offered.
The user must assume the entire risk of using the program. Any
liability of the seller will be limited exclusively to product
replacement or the refund of the registration fee.
*********************************************************************
* ASSOCIATION OF SHAREWARE PROFESSIONALS *
*********************************************************************
This software is produced by Richard Olsen who is a member of the
Association of Shareware Professionals (ASP). ASP wants to make sure
that the shareware principle works for you. If you are unable to
resolve a shareware-related problem with an ASP member by contacting
the member directly, ASP may be able to help.
The ASP Ombudsman can help you resolve a dispute or problem with an
ASP member, but does not provide technical support for members'
products. Please write to the ASP Ombudsman at 545 Grover Road
Muskegon, MI 49442-9427, USA or send a CompuServe message via
easyplex to ASP Ombudsman 70007,3536.
_______
____|__ | (R)
--| | |-------------------
| ____|__ | Association of
| | |_| Shareware
|__| o | Professionals
-----| | |---------------------
|___|___| MEMBER
Olsen Outdoors Software Order Form
_____ Copies of Bass Class @$15 for 5 1/4 inch disks, $17 for 3 1/2 inch
disks. NEW! A bass fishing game that also a great learning tool. All the
features of BassTour but not a tournament situation. Requires EGA and 512k
of memory. Lots of fun, highly educational. On screen help and glossary.
_____ Copies of BassTour @$15 for 5 1/4 inch disks, $17 for 3 1/2 inch disks.
BassTour is the ULTIMATE fishing game for your computer. You control a FULLY
rigged bass boat. Over 2300 lure/color combinations. Six different rods.
Trolling motor, LCD chart recorder and lots more. Comes complete with six
different areas to fish. Works on VGA, EGA, MCGA, CGA, and Hercules graphics
systems. Requires 512k of memory. Mouse support is provided, but not
necessary. Fish a 3 day tournament against 30 of the top names in bass
fishing!
_____ Copies of Lakes #1 @$10 for 5 1/4 inch disks, $12 for 3 1/2 inch disks.
This disk contains an additional seven fishing areas that you can add to your
BassTour or Bass Class game.
_____ Copies of Lakes #2 @$10 for 5 1/4 inch disks, $12 for 3 1/2 inch disks.
This disks contains another seven fishing areas for use with BassTour or
Bass Class.
_____ Copies of Lakes #3 @$10 for 5 1/4 inch disks, $12 for 3 1/2 inch disks.
Each is BRAND NEW (released 1/1/91) and hardly been fished! Use of Lakes #1,
#2, and #3 will expand your BassTour or Bass Class game to 27 lakes!
_____ Copies of FishBase ][ @$15 for 5 1/4 inch disks, $17 for 3 1/2 inch
disks. FishBase ][ is a fishermans log book and data base program that also
gives you lots of statistics about the fish you catch. For color or monochrome
systems. Requires 256k of memory.
_____ Copies of BassTips @$10 for 5 1/4 inch disks, $12 for 3 1/2 inch disks.
BassTips is a collection of over 100 fishing tips. Complete with a tip editor
so you can add your own tips. You can configure the tips to 'POP' onto your
screen. For color or monochrome systems.
_____ Copies of TIKLER @$15 each for 5 1/4 inch disks, $17 for 3 1/2 inch
disks. TIKLER is an appointment/reminder program that is FAST as well as easy
to use. Reminds you of upcoming events such as birthdays, meetings etc. You
can set how many days in advance you want to be notified. Handles up to 600
events and has a built in perpetual calendar. For color or monochrome systems.
Requires 256k of memory.
Sub Total $_______________ Mail your order to: Olsen Outdoors
68 Hartwell Avenue
Shipping $2.00 per order Littleton, MA 01460
U.S.A.
TOTAL $_______________(cash, check or money order
U.S. Funds please)
Your Name_______________________________________________________
Street Address__________________________________________________
City_____________________________State_______ZIP________________
< 16 >
SITE LICENSE INFORMATION
Site licenses for TIKLER are available which can substantially
lower your licensing fees. The following page is a sample TIKLER
site license agreement. If you wish to obtain a site license for
TIKLER, use this sample to begin the process.
Site licensed versions of TIKLER are identical to the shareware
versions with the exception that they have a different "sign off"
screen which identifies the program as being licensed to the company
or individual named as the USER on the site license agreement. A
special version number is assigned to each site license and will
appear on the bottom status line of the screen while the program is
running.
To obtain a TIKLER site license, this is what you need to do:
1. Fill in the sample site license agreement that appears
on the following page. Be sure to enter all of the
requested information, and to type or print clearly.
2. If you have special requirements, please specify them
clearly on a separate sheet of paper.
3. If you require more than the normal three master copies,
be sure to indicate how many more you need in the space
provided. These additional master copies are $2.00 each.
4. Send the completed and signed license agreement, your
check, money order or purchase order for the proper
amount (don't forget the $2.00 each for extra copies) to:
Richard Olsen
Olsen Outdoors
68 Hartwell Avenue
Littleton, MA 01460
Upon receipt of the above items, your licensed master copies will be
delivered to you along with your copy of the signed license agreement.
If your license fee is to be paid by purchase order/invoice, the
license does not become effective until receipt of payment, and may
be revoked if payment is not received within the time specified on the
invoice.
SITE LICENSE AGREEMENT
This document represents an agreement between the user,
_____________________________________ and Richard A. Olsen, the author.
It grants permission to the above named company or individual to use the
following computer program:
CURRENT VERSION OF TIKLER
The program may be installed on any number of computers owned by the
above named company or individual, up to the limit indicated below, for
which the licensing fee has been paid. This license agreement is
perpetual and does not require renewal. Additional copies of the
program may be made by the user as required.
Richard Olsen certifies that he is the author and copyright owner of the
above named program. This license is effective upon signature by both the
author and an authorized representative of the licensee, and receipt by
the author of the license fee. Upon receipt of the signed license
agreement and fee, the author will deliver three (3) copies of the
current version of the program to the individual named as the person to
contact listed below, on the disk format specified. Extra copies may be
requested for an additional $2.00 per copy.
Number of Computers License Fee
----------------------------------------
1 to 50 $100.00
51 to 100 $150.00
101 to 200 $200.00
201 to 300 $250.00
301 to 400 $300.00
401 to 500 $350.00
UNLIMITED $500.00
This license covers ________ computers. Amount of license fee ________
Disk Format Required: ___________ 3.5" ___________ 5.25"
Number of Additional Copies Required _______________
Signatures:
Author ______________________________________ Date _______________
User Representative _______________________________ Date _________
Company Name _____________________________________________________
Contact Name _____________________________________________________
Telephone ________________________________________________________
Mailing Address __________________________________________________
City ___________________________ State ______________ ZIP ________
